It’s Sunday, and I got up very late. Midday! I sold a couple of 200W LED lights to a guy calling himself ‘Danny Fury’. I didn’t get anything like their real full value. But we need to thin down our clutter. I got £60 for the pair.
I’ve also been moving stuff from the grey shed (shed #3!) into the big green shed (#4!). And then I finally got around to what is, I think, my third (or poss even fourth?) attempt at hanging a door on shed #3. I’ve come to realise that this entire shed must be a leaning-to-the-right parallelogram!
Head foreman Chester checks my work!
The door itself is cut pretty durn square. And the horizontal cladding is pretty durn horizontal. And yet the door seems to lean right, which is most evident at the top and bottom. What this should teach me is to take more care when erecting such structures, to keep all the main members running as straight, true and square as I possibly can.
Anyway, with a much more satisfactory door in place than heretofore (the previous door just kept failing to pieces!), next I’ll be adding a door-handle and locks.
A lovely blaze!
Today was nice enough to eat our lunch outside. Which we did. Plus we had our first fire of the year. Something about fire is so primal! As Tom Waits once sang, ‘all Hallowe’en orange and chim-e-ny red’!
After what seems an aeon, I’ve finally had a coincidence of time and suitable weather, and been able to get the roofing felt on.
As usual, nothing in the line of DIY is totally straightforward. I had one old roll of felt, and one new one. The old one was in a poor state, along one edge, kind of adhering to itself as I unrolled it. This caused the sheet to have a very tattered and ragged edge; fortunately along the outer side. But I was able to cover a whole strip nonetheless.
Getting the felt sheets in place.
The other roll did another two strips, with the three sufficing to cover the whole roof. I had to pop out for more roofing tacks, as I my old supply finally ran out. In the end I didn’t use the plastic sheeting. That helped keep the OSB board dry.I
had kind of wanted to have a plastic membrane under the felt. But it was too wet and dirty. So I opted not to use it. I’ll keep it, for possible future usage.
Hammer and tacks…
We also have the corrugated roofing sheets that came with the shed. The original roof! I didn’t want to just use that, as the shed was, in its previous incarnation, very damp, cold and drafty. It’s now much more hermetically enclosed.
There’s still a broken window and bit of open wall panelling to sort out. The biggest remaining jobs are putting in a floor and running electricity down the length of the garden, to supply this new workspace.
The current view from ‘up on the roof’.
I’ve spent quite a bit of time on the roof of this shed lately. I had to add the strips along the longer sides. I also added home made wood filling paste to all the joints where there was any air between boards.
Staying safe up there meant not walking in the middle of the boards, but instead sticking to the supported wall areas. I’ve had to sweep a lot of leaves, twigs, and – eugh! – guano, off the roof. I guess I’ll have to do so occasionally. If I don’t it’ll really build up.
Still clamped, even after tacking down.
I’m not 100% sure how I’ll finish the undersides of the felt, and attach it to the OSB boards. Plus I need to add a bit more cladding around the area where my new roof meets the walls. So there’s still plenty to do!
I’m also unsure as to exactly how I’ll do the floor. But that’s a job for the new year! I’d like to get the broken window and the gap in the cladding sorted. But I’m very happy to have got the roofing felt on… at last!
Grabbing whatever moments I can – when we’re both at home and the weather’s ok, a rare combo of late – I get a little time here and there to progress work on the shed roof.
I recently extended the longer edges, which previously didn’t project over the walls. This was to make sure rain would run off, not down/through the structure. I didn’t do the best or prettiest job.
Mixing wood filler paste.Mmm… yummy!
So today I mixed a paste of wood dust, wood glue, and a little water, and filled in the seams where boards didn’t meet quite as flush as we’d have liked. Hopefully this bodge will suffice to keep the pieces together, and stop water passing through?
Filling quacks…
What a rubbish photo the above is! My excuse is that I was more concerned with getting the job done than photographing the work in progress.
It’s good to be chipping away at what is a reasonably large job, and gradually getting nearer to completion. I hope I can get the roofing felt on before the snow arrives!
Whenever there’s been a brief interlude without rain (not often lately!) and I’ve been home/free, I’ve grabbed the opportunity to make progress – even in tiny little incremental steps – on the shed roof.
The four panels that I used to do the roof were more than adequate lengthwise, giving enough coverage to project at each end (front and back, I suppose?). But the 8 foot length boards were only just big enough to reach across the width of the roof.
New projecting strips added on the ‘south face’.
Also, the shed was a bit out of square. So once the roofing boards were up and in place, they didn’t present straight/flush edges along the longer axis of the whole roof.
This meant I had to trim them, to get a straight line. And then somehow add long strips. Fortunately the off it’s from the front and back were just enough for the job. I had to cut them in half lengthwise. Bit of a faff!
But I did it. And on one day last week – Tuesday perhaps? – I did the higher side. And today I did the lower side. It wasn’t easy! And I didn’t do a perfect job. Far, far from it!
The inside view, under the new roof.
But hopefully it’s adequate? At least now the roof project out over the shed walls on every face. I’ll prob’ want to mix some sawdust and wood-glue filler, and fill some of the gaps between panels. And I’ve tried to find screws long enough to go through the whole width of the add-on boards.
Anyway, a couple more small steps towards getting the shed shop shape, and ready to move all my tools out of the previous workshop. The latter will become our art studio. With room to paint. A small etching press, and – if I can get it working – a kiln!
So, yesterday (Saturday) I got three of the four roof panels up. Today I did the fourth and final board. Although I don’t think it rained last night, it was foggy and wet this morning. All the boards already on the roof were affected; softened (and therefore more flexible), with areas where some individual strands were buckled from soaking up water. Not good!
Today, Sunday, I not only got the final panel in place, but also bought some very cheap plastic sheeting, from Boyes, as a temporary moisture barrier. I hope it’ll keep the boards safe over tonight. Then tomorrow I can collect some better thicker stuff from Screwfix in Peterborough – which I bought at the March Screwfix (but too late to collect from their Peterborough branch, where they had stock) – and attach it properly.
Striking a pose with my ‘Samurai’ saw!
Then there’ll be a layer of roofing felt. And then on top of that, the corrugated metal roofing which was the sheds original roof. 18mm OSB3, plastic sheet, felt, and a metal roof. That ought to do the job!
Whilst up on the new roof I had to continually brush off fallen leaves and twigs. So I took the opportunity to remove some dead wood and trim back the bits of tree branches that threatened to ‘ave somebody’s bloomin’ eye out’.
Earlier today I finally got around to starting the roof on shed #4. We bought the OSB3 boards some few weeks back. But since then there simply hasn’t been either the time, manpower, or appropriate weather conditions (too wet, and/or dark!), to ‘get it up’ (chortle!).
Perhaps unsurprisingly the shed itself has proven to be a little out of square. Meaning that the roofing panels don’t line up as precisely as one would’ve liked. But, hey-ho, ‘tis wadi ‘tis!
Looking towards the rear of the shed.
I’d gotten three panels in place when Chris, our fairly new neighbour – they moved in about a year ago – offered to help. I said ‘nah, I’m alright, ta’, as the real work had been moving the boards, and Teresa had already helped me do that, earlier in the day. I got some excellent Roughneck branded board carriers, which really helped when it came to moving the boards.
Chris then suggested a trip to’t local Wetherspoons pub. And I jumped at the opportunity. Poss’ my first social ‘drink with a mate’ scenario in three or more years! And that, as much as the roofing work, is what prompts this post. Here I am, back home, pissed. Bit of a hangover. Teresa a little miffed at my going out like (and for as long as) I did, etc. I certainly had too much to drink. Three pints and a double rum’n’coke.
Looking towards the front.
I do worry, on this head, as my dad, and his dad afore him, are/were alky-horlicks. And I don’t want to be one… no sir-ee, nor me neither! But, time and again, I drink too much. Fool that I am! It’s fun at the time. But what I really dislike is the aftermath.
Bloated, gassy, with a headache. All things I’m prone too anyway. And ‘Al Cahole’, famous Chicago prohibition-breaker, just exacerbates these conditions. Oh, and it also makes me more likely to do other dumb-ass shit like smoking. Or just gabbing a little too freely.
Garden looking pretty.
Anyhoo… back to’t shed. Teresa took some pics, whilst I toddled off to’t pub. The garden is looking rather autumnal. Which is geet luverly! I got three of four panels up today. The fourth got a bit butchered, annoyingly, thanks to my cheap/shite Titan router not working as effectively or reliably as it oughta.
So tomorrow, Sunday, I need to sort out the last panel – trim off the buggered edges – and get that up and fixed in place. Once all the panels are in situ, and screwed down, I’ll need to put further weather-proofing stuff on. I have an amount of roofing felt already. But not, I reckon, sufficient for the job. We shall see, I suppose.
Right, off to’t khazi for a beery wazz…
POSTSCRIPT
Working on the final roof board.
This last pic, above, is a bit out of sequence. But it at least captures the work in progress. I tried to route overlapping profiles, so as to more securely interlock the boards. But my cheap Titan router is, frankly, shite. And not up to the job, sadly. So I had to abandon that idea. The above pic is me preparing to cut off the botched (and incomplete) routed profile edge.
You can see the latter, Along the right edge of the board. The brown shiplap slat is screwed to the board to act as a guide/fence. I had to nip out and buy a new circular saw blade. I wound up getting a cheap set of three from the local ToolStation. Prob’ not good quality. But they allowed me to make the necessary cuts. Whereas the previous dull blade was simply binding mid-cut.
New draught-excluder curtain over the lounge to kitchen door.
Teresa’s been on at me for some time, asking that I put up more curtain poles and supports, mostly for doorway draught exclusion porpoises. Oh, and Teresa is making the curtains. So it’s a joint effort.
And we also have he added economic impetus of looking to rent a room, and needing to get the property as a whole up to snuff for sharing with a rent paying tenant. So we need, amongst a zillion other things, curtains in the bathroom.
I already did a draught-excluding curtain pole thingy in the kitchen some while ago. And I want all the ones I make around our home to share a design, which is based, I guess, at least to some degree, on the classic ‘ogee’ profile. Incidentally, I’m talking about the two pole supporting doodads!
Making these in the workshop is fun. Although that said, my workshop is in such an awful mess it’s not that much fun! There’s another ongoing project; the new shed, finishing the damn thing, and getting stuff moved into it! Using the router to create the profiles ‘caps’ was especially gratifying.
I did want them all to have curved grooves (is that ‘fluting?’) in the ogee profiles, so you’d get that classic, er… classical look, of fluted verticals surmounted by profiled ‘pediment’ (?) tops. The result is, as Teresa put it, a bit pedestal-like.
I like to paint all the house woodwork in oil-based gloss white. I just feel it’s a classic timeless style, and that it works well in Victorian properties like ours. So I’m doing so with these, inc. the poles, which are 22mm hardwood dowels.
The older yet unfinished kitchen/back door one.
Attaching the ornamental pole supports can be tricky , as getting wall-plugs in to walls reliably in old (or is that any?) homes is a challenge. Then there’s the depth of wood to get through in the wider top part. I’ve developed a method I’m happy with. And so far it’s worked well enough.
You can see on these thicker and as yet unplugged and uncapped kitchen ones the holes for the screws. These get filled with dowels, or just some filler. These kitchen ones are ticker than the others. So the ornamental caps will need to be bigger. Not gotten around to making them as yet!
The next sequence of four pictures shows how, despite masking around these fixtures, I tend to get white paint on the walls. And in this instance (in the lounge the original paint colour – Egyptian Cotton – still matches), rather annoyingly, the paint colour, Asian Silk, which is literally from the same paint pot, doesn’t match! Gaaah!
Later the same day…
Not so easy to see, on account of the use of transparent shower curtain (fabric curtain eventually get mouldy and disgusting!), with all the daylight flooding in! At least the blotchiness of the touched up paint is less noticeable.
A double layer of transparency protects our modesty.*
‘Tis Sunday. A day of rest! Or not. I was off to Screwfix early, and then back to the shed, doing lots of little bits of work. Such as filling in gaps in the cladding, as pictured above.
Either end of a ‘tie-beam’.
And I added a more or less horizontal tie-beam, to stop the middle of the shed, where, along the longer sides, two panels abut, to stop the shed bowing either outwards or inwards, and to keep it square/parallel.
The tie-beam viewed from the other end, later on in the day.
I was able to fill in most of the cladding gaps. But there are three places where I need longer pieces of cladding than any I currently have.
One of the remaining gaps.This is the longest missing piece And finally this one, at t’front.
Hopefully I can get these gaps filled soonish?
All the windows have now been washed. Including the only ‘original’ one that’s left, pictured below. I still think I’ll want to add more glass, as I want the workshop to be as well lit, naturally and electrically, as poss’.
The sole original window that remains.
And all the original doors have been re-attached, alongside the path. Including both the double ‘barn style’ doors, pictured immediately below. And the larger single one, down another pic. The latter opens and shuts just as it ought to.
These aren’t closing as they should!
As well as the doors above not quite closing aright, you can perhaps also see that I’ve had to add a temporary lower framing member. This is another of the myriad small jobs that needs properly finishing, ASAP.
I’d like to make the additional piece tie in as strongly as possible. Esp’ as it not really supported. Hmmm!? What joints shall I use? We shall see…
And below is a view from the pathway. Showing all the side doors back in situ. I’m tempted to remove the double doors altogether, as they’re not opening or closing quite as they should. And, what with the two larger doors – the new one in the front, and the other older one, closer to the camera in the above photo – they may very well be redundant anyway.
The two side passageway doors back in place.
Teresa and I are currently spending lots of our time at home our in the garden. During this heat wave we’ve mostly sought out the shadier spots. And one of these is the area under the tree that’s now behind the latest shed.
When we’re both home we’ll have our meals outside as well. It’s really rather lovely! And we’ve now got a good deal of choices, as to where exactly in the garden we might want to be. It’s such fun!
Yesterday I started opening up what was formerly just a window, with a view (geddit!?) to introducing a door instead.
The ‘before’ state.
And then today I actually got the door cut down to size and installed. It was a funny old process. I managed to size the door on the first cut. Unusual for me! And I had a load of plastic shims that were massively helpful in doing a better fit/install than most of my previous efforts with ‘Dianas’.
Viewed from inside.
I really like the warm glow in the above picture. The evening sunlight coming through the tree, the leaves dappling the honey coloured light… ‘tis lovely!
Lunching, whilst working.
Backtracking a bit, above was today’s luncheon break. French toast, sliced apple, and cream o’tomato soup. Yum! The door became a temp’ table, in the manner of Alan Partridge’s ‘Apache Solutions’ pitch to Dante’s Fireplaces (what’s the burning issue!?). Like Alan, I didn’t have a hat hard-on…
So, recapitulating the process:
A new opening is cut out.
The new opening was wider than the original window. So I had to add a new vertical structural member. And I didn’t have the exact right timber, to match the rest of the framing.
The internal view: note new right hand beam.Offering up the as yet un-trimmed door.
As you can see, in the above pic, the door was too tall. So I had to trim a few inches off the bottom. But luckily the bottom was oversized (ooh, matron!), so I could shave a bit off. And to finish, a side by side of before and after.
I’m very pleased with this change.
I’m chuffed with how this turned out. And I might also add windows at this end, poss’ even on both sides… Hmmm!?
Potential colour scheme?
And finally (again!), a potential colour scheme. On the left is ‘Wood Pigeon’, and on the right ‘Tell Me A Secret’. Both are Valspar, B&Q’s paint range. Which I really like. And I love the colour names. Silly, perhaps. But satisfying!
Yesterday I got the two back panels of the shed roughly in situ’. I kind of wanted to go further. But I didn’t have the right fixtures (coach-bolts!). So I ordered some from Screwfix.
They arrived today. So it was on with the show… This shot shows how the tree at the back of the Arden overhangs this newest shed.
Note the little brace, on the left panel. I had a few others in different places, just holding stuff roughly in plane. I did all this assembly on my own. It was quite tricky!
All the panels needed the bottom framing element – at the furthest end, above – replacing, as the shed was pretty old, and the bottom was a bit rotten in places (very rotten in some!). I did all that before assembly, except for this final panel.
I moved a few bits inside the shed, so I could work on it internally.
Got the larger of the two side doors in place. I’m not sure about retaining the doors in the long side, as that doesn’t suit our long narrow garden too well. I’ll come back to this later!
The longer and lower side of the shed, running along Sean’s – our northern neighbour’s – fence.
Note how the panel on the left has five verticals, whilst the one on the right had just four. Evidence of this being a self-build project, perhaps, by whoever made this shed originally?
This panel, originally the left of the shed, is what’s now the back, facing the far end of our long garden. I’m thinking about putting a pretty large window in. So we can see to the back of the garden, enjoy evening sunlight, and see the big old tree that’s only feet away.
This larger opening has two smaller doors that go in it. Again, I’m thinking I might change the layout a bit, in the fullness of time. These two doors are the last major components of the shed walking ‘as is’ that remain to do. Then there’s the roof and floor!
One of the new timbers is very obvious in the above image. Also worthy of note is that the window in this photo survived transit and re-assembly unbroken. Whereas the other window – below – didn’t!
Note another supporting brace, in the above picture. This was the right end, but is now the front facing aspect of the shed, that you see as you come down the garden. As can be seen in the next pic’, below.
There’s another highly visible new bit of timber along the bottom of the above panel. Plus the lowest piece of timber cladding on this face was rotten, and fell off/to bits! That’ll need replacing.
The whole shed might want shifting, about three or four inches towards the fence. I’ll defola need help doing that! But in the meantime, there’s a bit of a gap here.
The neighbours fence is falling down in places along this part. Is there sufficient gap, I wonder, to allow for minor repairs and weatherproofing painting/treatment?
The strip of garden south of the shed, ‘twixt the shed and Ruben and Anne’s garden is pretty narrow! If I can shift the whole shed towards Sean’s, we’ll gain a bit more space here. Albeit only three or four inches!
Teresa arrived home whilst I was chatting to Chris and his partner, our relatively new neighbours, at no. 66. She was really impressed that I’d ‘got it up’ all by my own! Not that you can tell that from this pic’.
Looking into the shed interior as we go down to the rear/far end of the garden.
Teresa’s approbation of my efforts is more visible here, methinks. Also visible here are the two doors yet to be affixed to the larger side openibg.
Looking back towards the house. My what a tight passage we have! If we can shift the whole shed back a few inches, it’ll help ease our passage…
This is the view, sat in our deckchairs, behind the shed, looking up at the venerable aulde tree, around 7pm this evening. What a beauty, eh!?
So, sometimes it really does pay to be a scavenging hoarder! This old door, a Freecycle acquisition going back four or five years, perhaps, is going to be ideal – with some judicious trimming – as the new front door, probably roughly where I’ve leaned it in the above picture
